• Slide 1
  • Slide 2
  • Slide 3
  • Slide 4
  • Slide 5

Corporate Office
184 West Blvd
Montgomery, AL 36108
(800) 222-6353 (Toll Free).

Forklifts

Used Equipment

Why buy pre-owned?

Everyone would like new equipment fresh off the production line with the latest technology and no prior wear, but the reality is that budget constraints usually force a difficult decision between buying a new or used forklift. Anyone that has done the analysis between the purchase of a new or used automobile understands some of the basic issues involved. Damage to the used used forklift is the most obvious and first concern but there are several additional factors to consider. The relative reliability and safety of new equipment will not just give you that peace of mind you are looking for, it can help with long term expenses when downtime and potential accidents can cost you. Used Pallet Jack The fundamental issue is that there are significant savings that are possible with a used forklift. For example, purchasing a brand new, electric warehouse forklift with standard capacity will run in today's market about $15,000-$25,000. Add to this the $2,000 to $5,000 needed to purchase a battery and its charger. Finding a similar IC (internal combustion) forklift will run from $15,000 to $30,000. Either forklift can run much more based on how it is configured and its lift capacity. Compare this to the cost of buying a well refurbished used electric forklift with a 3,000 pound capacity will cost between $5,000 and $10,000. A used IC forklift with a 5,000 pound capacity will run in today's market from $10,000 to $15,000 or a 30% to 50% savings. Digging Deeper Than The Upfront Costs The upfront savings must be compared to ongoing operating/maintenance and downtime costs. These can vary widely based on the type of lift purchased. For example, assuming a 250 day work year and a two-shift workday: Used Electric Forklift- $1,000 to $1,700 Used Diesel Forklift- $1250 to $16,000 Used LP Gas Forklift- $9,000 to $13,000 The maintenance costs for similar usage can run from $500 to $2,000 a year, with the IC forklifts on the higher end of maintenance costs. *Rates are estimates and vary based on location and forklift size in addition to type & amount of use. Although the final decision between new or old depends on your specific situation, most experts indicate that a carefully chosen pre-owned is the best option if the used forklift is: Used on a single daily shift Used no more than 5 days a week Used no more than 5 hours a day Not part of a heavy, not-stop warehouse environment Where You Buy a Used Forklift Matters Not all sources are created equal and there has to be a level of trust between the buyer and seller who may be able to hide previous damage or lie about the type of work a lift truck was performing. Choose carefully who you buy from: Individuals This is the riskiest choice for buying a specialized machine such a forklift, especially from someone you don't know. This person does not have to worry about any negative impact on the reputation of their business if something goes wrong. And if something really goes wrong, you will have a harder time using the court system to recoup costs. Forklift Fleet Owners Large businesses often replace old machines and can be a great source for finding a good deal. You can get a good idea of what the forklift has been through by understanding their business, and it is easier to trust a local company rather than an individual. Used Forklift Dealers These are dealers not associated with a particular brand but sell repos, used, and off-lease lift trucks. Many of these sources are available online with a national coverage. They bring a lot of the benefits of a manufacturer dealer with the value of not pigeon holing you to one brand. Certified Used Forklift Dealer Many authorized dealers certified their used forklifts and perform extensive overhauls if necessary to make sure the equipment runs like new. In most cases a warranty of some period will also be given. Although more expensive, these often represent a good hedge against the new forklift cost. Used Toyota forklifts for example are well known for their 103 point inspections, and Nissan and CAT also have certified programs for their dealers. A major consideration in the choice of both a brand and source for a used forklift is ongoing maintenance costs and availability of parts and services. As work vehicles, maintenance is a fact of life. Dealers like Toyota, who sells one in five forklifts globally, can be relied on to take care of you after your purchase. Upfront savings quickly disappear if maintenance and downtime start chipping away at you, not to mention the frustration involved. Once you have chosen a supplier or at least have narrowed it down, you need to have the right questions ready. Are the operating logs and maintenance records clean and up to date? An inspection should include checks by a certified operator to put the used lift truck through its paces to evaluate it's basic working order. At a minimum your checklist should include: Mast operation, both without a load and with the forklift's full rated load Look For Smooth Operation. An experienced operator will know the feel of a functioning forklift and avoid machines with any binding or slippage. Look for leaks. Any leaks, even seemingly small ones, are red flags. After the truck has warmed up, check the mast and tile cylinders, transmission, engine, differential, and radiator carefully. Check the tires. Look for uneven or excessive wear. This is a potential expense to add to the cost. Irregular wear can also indicate misaligned axles. A detailed mechanical inspection from a qualified forklift mechanic. They have detailed checklists to inspect used forklifts. Go over that list and ensure that it covers everything from oil pressure to operational and missing safety devices. A careful and methodical approach to purchasing a used forklift can save thousands of dollars and get the job done.

Parts, Service & Rentals

Parts Department

Our Parts Department has competitively priced parts for all lift truck brands, sourced by a dedicated staff with extensive parts knowledge. We carry a total parts inventory of over $1.2 million, made up of genuine OEM Unicarriers Parts and aftermarket parts for all major forklift brands. We pride ourselves in taking care of our customers needs.

Service Department

Our Service Department has 150+ years cumulative experience with Dyna-Lift alone.  Our average mechanic has 7 years experience. We guarantee a 2 hour response time.  Our service vans are fully equip to handle any job in the field and if it requires being brought to the shop, we have hauling trucks to handle this, and shop mechanics to quickly turn the Lift around. We also schedule mobile tire replacement at your convenience.

Rental Department

Our Rental Department can handle Warehouse Lifts, Narrow Aisle, and Outdoor requirements. Rental Lifts are at all of our locations. Most of the Rental Lifts are less than 6 years old.

Material Handling Catalog

The Online Catalog

Contact Us

Montgomery, AL - Corporate Office

184 West Blvd
Montgomery, AL 36108
1-800-222-6353
334-263-1600
334-262-0420



Dothan, AL

193 Ross Clark Cir
Dothan, AL 36303
1-800-759-9499
334-792-6631
334-792-0845



Columbus, GA

7120 Jamesson Ct #A
Columbus, GA 31820
1-800-222-6353
706-987-8143
706-987-8148



Tifton, GA

312 Oakridge Church Rd
Tifton, GA 31794
1-888-222-5717
229-388-5748
229-238-0524